Model: TR-80 x 1800 (Drill head rotation)

Feature

1. Machines utilizing the BTA Deep Hole Drilling System for solid deep hole boring 30 – 200mm in diameter.

2. Deep hole drilling machine's drilling depths up to 5000mm.

3. Coolant filtration to 30 microns.

4. The rigid honeycomb walled Bed gives a stable cutting condition. FC-32 castings have been stress relieved and annealed.

5. Hardened and ground ways to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand-scraped bearing surfaces.

6. An automatic lubrication pump is provided as a standard accessory to ensure all the bearing surfaces and screws are well-lubricated.

7. All box-way design provides rigidity for heavy cutting.

8. Type WR is the workpiece rotation. TR is the drilling head rotation, the workpiece is fixed on the fixture.

9. CE marks are available for special requirements.

Specifications

Specification	Model No.	TR-80	TR-120	WR-80	WR-120	WR-200
Drill Capacity	Hole dia	Ø30~Ø80mm	Ø30~Ø120mm	Ø30~Ø80mm	Ø30~Ø120mm	Ø30~Ø200mm
	Max. depth (Z)	1000/2000	1000/2000	1000/2000	2000/3000	2000/3000/4000
	Max. depth (Z)	mm	mm	/3000mm	/4000mm	/5000mm/6000mm
Power	Spindle motor	50 kw with Inverter	75 kw with	30 kw with	50 kw with	75 kw with
	Spindle motor	50 kw with Inverter	Inverter	Inverter	Inverter	Inverter
	Drill spindle feed (Z)	Servo motor 850~1300W / 5.39~8.34 N.M..		4.0 kw	7.0 kw	11.0 kw
	High pressure pump motor	-
Speed	Max. spindle speed	150~1500 rpm	120~1200 rpm	150~1500 rpm	150~1500 rpm	120~1200 rpm
	Drill Speed	1~200 mm/min
	Rapid	4000 mm/min
Ball screw for feeds Z-Axis		Ø63 x P10	Ø80 x P10	Ø63 x P10 x C5	Ø80 x P10 x C5
Swing over bed		500 mm	770 mm	500 mm	770 mm
Controller		FANUC / MITSUBISHI / SIEMENS / SYNTEC
High pressure pump	Pump output	350 Liter/ min	1000 Liter/ min	350 Liter/ min	750 Liter/ min	1000 Liter/ min
(Every spindle one set)	Max. pressure	25 kgs/cm²
	Coolant tank	1600 L	4500 L	1600 L	4500 L	6000 L
Floor space		-
Standard accessories		Heat exchanger for spindle head bearing circular oil.
		Chip conveyor + Paper filter (500L) unit with coolant tank
		Pressure head for drill dia. Ø30~Ø120mm
		3-points work Rest Ø25~Ø 280 x 1 set
		Drill tube vibration damper and rest x 1 set

Optional accessories		Coolant tower Model:

		Pressure head for Dia. 100~200mm
		2-points workrest Ø140 ~ Ø 400
		3-points workrest Ø25 ~ Ø80
		Heavy duty roller type workrestØ260 ~ Ø530
		Spare parts for pressure heads of different sizes
		Exchanging spare parts for different drilling sizes