Precision Spindles
The GW spindle and the RW spindle are precision machined and made from alloy steel. They undergo normalization, aging, and heat treatment, followed by sub-zero treatment, and are finally finished through precision machining and grinding.
Feed Screw
The feed screw is manufactured from alloy steel. It is also normalized, high-frequency hardened, and precision ground to ensure high feeding accuracy and excellent wear resistance.
MODEL |
|
| Model | PC-18S |
GRINDING WHEEL |
|
| Standard grinding range diameter | Ø1 ~ Ø80 mm |
| Capacity with special arrangement | Ø40 ~ Ø150 mm |
| Grinding wheel size (OD × Width × ID) | Ø455 × 205 × Ø228.6 mm |
| Linear velocity | 33 m/s |
| Grinding wheel motor | 15 hp × 4P (11 kW) |
REGULATING WHEEL |
|
| Size (OD × Width × ID) | Ø255 × 205 × Ø111.2 mm |
| Speed (variable) | 10 ~ 300 rpm |
| Motor | 3 kW servo motor |
| Tilt angle | ±5° |
| Swivel angle | ±5° |
HANDWHEEL GRADUATIONS |
|
| Upper slide feed | 3.5 mm/rev / 0.05 mm/graduation |
| Upper slide micro feed | 0.1 mm/rev / 0.001 mm/graduation |
| Lower slide feed | 7 mm/rev / 0.05 mm/graduation |
| Lower slide micro feed | 0.2 mm/rev / 0.001 mm/graduation |
| Trimming device | 2 mm/rev / 0.01 mm/graduation |
MOTOR |
|
| Hydraulic motor | 1 hp × 4P |
| Coolant motor | 1/4 hp × 2P |
| Lubrication | Manual lubrication |
TANK |
|
| Coolant tank | 170 L |
| Hydraulic tank | 88 L |
| Lubrication tank | 0.6 L |
MACHINE WEIGHT |
|
| Net weight | 2900 kg |
We Welcome all inquire regarding sales, service and spare part.Our representative will get back to you as soon as possible
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
