All castings are properly stabilized and stress relieved.
Bed ways are hardened & ground to min. HRC 48 - 55.
Turcite B coating between the bed and carriage.
Extremely low noise level.
Foot brake pedal provided.
Built-in coolant pump & fitting provided.
Wider bed way which gives absorbs vibration.
| MODEL | TC-1640 | ||||
| CAPACITY | |||||
| Height of centers | 205 mm (8.07") | ||||
| Swing over bed | Ø410 mm (16.14") | ||||
| Swing in gap | Ø620 mm (24.4") | ||||
| Swing over cross slide | Ø255 mm (10.04") | ||||
| Distance between centers | 1000 mm (40") | ||||
| Width of bed | 305 mm (12") | ||||
| Gap width in front faceplate | 120 mm (4.72") | ||||
| HEADSTOCK AND MAIN SPINDLE | |||||
| Spindle nose, internal taper | 120 mm (4.72") | ||||
| Spindle center sleeve | Ø70 mm (2.76") Taper 1/19.18 MT x NO.4 | ||||
| Spindle bore | Ø65 mm (2.55") | ||||
| Spindle speed: Gear steps / Range | 12 steps / 36 ~ 1800 RPM | ||||
| Spindle speed: 36 | 130 | ||||
| Spindle speed: 620 | |||||
| CARRIAGE | |||||
| Cross slide travel | 250 mm (9.84") | ||||
| Top slide travel | 155 mm (6.1") | ||||
| THREADS AND FEEDS | |||||
| Whitworth threads: Kinds / Range | 45 kinds / 2 ~ 72 T.P.I. | ||||
| Metric threads: Kinds / Range | 39 kinds / 0.2 ~ 14 mm | ||||
| D.P. threads: Kinds / Range | 21 kinds / 8 ~ 44 D.P. | ||||
| M.P. threads: Kinds / Range | 18 kinds / 0.3 ~ 3.5 M.P. | ||||
| Longitudinal feeds | 0.04 ~ 1.0 mm (0.0015" ~ 0.04") | ||||
| Cross feeds | 0.02 ~ 0.5 mm (0.00075"~ 0.02") | ||||
| TAILSTOCK | |||||
| Quill diameter | Ø59 mm (2.322") | ||||
| Quill travel | 127 mm (5") | ||||
| Taper of center | MT No. 4 | ||||
| MOTOR | |||||
| Main spindle | 5 HP (3.75 kW) | ||||
| Coolant pump | 1/8 HP (0.09375 kW) | ||||
| MEASUREMENT | |||||
| APPROXIMATE Weight | NET 1600 kgs | ||||
| Gross Weight | GROSS 1800 kgs | ||||
| Length | 2400 mm | ||||
| Width x Height | Width 1120 (44.1") x Height 1900 mm (74.8") | ||||
We Welcome all inquire regarding sales, service and spare part.Our representative will get back to you as soon as possible
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
