Grinding Application (for OIG-200D)
Two internal wheel spindle model for your various application requirements. It is capable of grinding internal holes, end faces, and outer diameters in a single setup.
Automatic Operation
To meet mass production requirements, automatic loading and unloading equipment is available to enable fully automatic operation.
Slide Table
The slides move on roller-type linear guideways to ensure smooth and stable movement.
Upgrade Positioning Accuracy
The feed axis is equipped with an optical scale to enhance positioning accuracy.
MODEL |
|
| Model | OIG 200 D |
CAPACITY |
|
| Max. chuck outer diameter | Ø200 mm |
| Max. internal grinding dia. | Ø150 mm |
| Max. workpiece length | 200 mm |
INTERNAL WHEEL SPINDLE |
|
| Spindle outer diameter | Ø90 mm |
| Spindle speed | 10000~50000 rpm |
X AXIS TABLE |
|
| Rapid feedrate | 10 m/min |
| Max. table traverse | 480 mm |
| Min. setting unit | 0.001 mm |
Z AXIS TABLE |
|
| Rapid feedrate | 10 m/min |
| Max. table traverse | 480 mm |
| Min. setting unit | 0.001 mm |
Y AXIS TABLE |
|
| Rapid feedrate | 10 m/min |
| Max. table traverse | 480 mm |
| Min. setting unit | 0.001 mm |
WORK SPINDLE |
|
| Workhead swivel | +7° ~ -8° |
| Center taper | M.T. No. 6 |
| Spindle speed (variable) | 0~500 / 0~800 rpm |
| Max. load of spindle (tool holder included) | 35 kg |
MOTOR |
|
| Grinding wheel | 1.5 kW |
| Workhead | 0.75 kW |
| X axis infeed table | 1.8 kW |
| Z axis infeed table | 1.8 kW |
| Y axis infeed table | 1.8 kW |
| Hydraulic pump | 0.75 kW |
| Coolant pump | 0.09 kW |
TANK |
|
| Coolant tank | 70 L |
MACHINE WEIGHT |
|
| Net weight | 5700 kg |
We Welcome all inquire regarding sales, service and spare part.Our representative will get back to you as soon as possible
Riveria Avenue 2, First Floor, Office No 10, F43F+2X, Al Ashriah Street, Al Mazruiyah, Dammam 32414, KSA
